Homepage CPR Store art team updates photos preorder guides faq contact

 

Note:  Our fullsize playfields are made in runs typically sold by preorder, months or years in advance.
You can find the preorder page here for future runs.  If by chance we over-ran, or enough people abandoned
their preorders, the leftover "firsts" will be listed here.  "Seconds" will randomly pop up in the Bargain Basement.

Sold-out runs from years past are simply not available here.  Please don't email asking about re-runs, thanks.
Occasionally, former customers end up not swapping into a game, and sell their unused CPR playfields publicly.
Put out your want-ad on rec.games.pinball, or keep an eye on Ebay or other common pinball sales sites.


ORDERING INSTRUCTIONS AT THE BOTTOM OF THE PAGE


 

Part #: FPOW-SINGLE, FPOW-COMBO
In Stock:  SOLD OUT

Williams
FIREPOWER
Reproduction Playfield - DROP TARGET READY

Artwork by Jim Smith, CPR Art Team

Genuine 9-color enamel silkscreened and 5-layer polyeurethane clearcoated.  Dimpled both sides, drilled, and ready for installation right out of the box. Includes two new white nylon rollover stars.  We ran the playfields as per the original Williams prototype design, with the banks in front of the pop bumpers being drop-target compatible. Also, the inserts are upgraded to starburst-style. For a close look, be sure to check out the Firepower Gallery to see outdoor photos.  Plastics set Combo is also being offered, where you get the complete $145 superset with topper & bonus pieces (saving $45) with no additional shipping to slip them into your playfield box.


SOLD OUT
- For discounted "Seconds", watch the Bargain Basement
(when periodically available)


Shipping :
$45.00 to Canada
$55.00 to USA
$129.00 Europe (5-6 days)
$189.00 all other, Global (5-6 days)
Part #: CYCL-SINGLE, CYCL-COMBO
In Stock:  YES


Williams
CYCLONE
Reproduction Playfield

Artwork by David Eisner, CPR Art Team

Genuine 11-color enamel silkscreened and 5-layer polyeurethane clearcoated.  Dimpled both sides, drilled, and ready for installation right out of the box.  For a close look, be sure to check out the Cyclone Gallery to see outdoor photos.  Plastics set Combo is also being offered, where you get the complete $145 set with clears (saving $70) with no additional shipping to slip them into your playfield box.


Price:  $649.00 USD CYCL-SINGLE PF alone
Price:  $725.00 USD
CYCL-COMBO  w/ plastics
Save $70 on plastics in combo


- For discounted "Seconds", see the Bargain Basement
(when periodically available)


Shipping :
$45.00 to Canada
$55.00 to USA
$129.00 Europe (5-6 days)
$189.00 all other, Global (5-6 days)

Part #: SHUT-SINGLE
In Stock:  NO ORDERS UNTIL FURTHER NOTICE


Williams
SPACE SHUTTLE
Reproduction Playfield

Artwork by Ed Cheung & Cameron Jensen, CPR Art Team

Genuine 9-color enamel silkscreened and 5-layer polyeurethane clearcoated.  Dimpled both sides, drilled, and ready for installation right out of the box.  For a close look, be sure to check out the Space Shuttle Gallery to see outdoor photos. 


Price:  $599.00 USD


- For 30th Anniversary Edition, see the Bargain Basement
- For discounted "Seconds", see the Bargain Basement
(when periodically available)


Shipping :
$45.00 to Canada
$55.00 to USA
$129.00 Europe (5-6 days)
$189.00 all other, Global (5-6 days)

Part #: PLAF-ELEK
In Stock: 
YES

Bally ELEKTRA
Replacement Laser-Cut Playfield Surface

Design by Kevin, CPR

DETAILED PHOTO GALLERY - Click Here


Elektra featured an entirely plastic (and very thick) playfield surface/cover on its main playfield.  This of course offered the view to the lower playfield without the use of an embedded playfield window.  Your battle with Novus can end now!  Billions of scratches from decades of ball wear have fogged the view to the lower playfield and mussed-up the surface on nearly every Elektra out there.  Here is the solution to give your Elektra playfield that clarity back, just as it looked new-in-box.  This new playfield surface is a turnkey replacement, laser & CNC cut with gorgeous glassy edges on all holes, and shipped with protective coatings on both sides.  You peel for the first time, revealing virgin crystal-clear (and we mean crystal-clear) clarity.


Price:  $99.00 USD

Shipping :

$24.00 to USA
$24.00 to Canada
$89.00 Europe (5-6 days)
$109.00 all other, Global (5-6 days)



DETAILED PHOTO GALLERY - Click Here

BACKSIDE MAPPING GUIDE HERE (PDF)

Part #: PLAF-SHAD
In Stock: 
YES

SHADOW    Bally Midway
Reproduction BATTLEFIELD Mini-Playfield

Artwork by Mike Mills, CPR Art Team

This is The Shadow's mini-playfield called the "Battlefield".  Usually tore up by ball-drop from the habitrail, as well as kicker action, this is a turnkey replacement.  Built like a fullsize CPR playfield, 8-color enamel silkscreened and polyeurethane clearcoated on genuine American Hardwoods 17/32 mapletop gameboard stock.  We matched a donated "mint" NOS specimen, which didn't include dimples on the back - however, there were putty-filled holes (?), which we provide a mapping document (see link) for your convenience.  Always compare and confirm with your original during swap, considering these were always an item final-prepped on the assembly line. 


Price:  $119.00 USD

Shipping :

$16.00 to USA
$14.00 to Canada
$59.00 Europe (5-6 days)
$69.00 all other, Global (5-6 days)

Part #: PLAF-F2K
In Stock: 
YES

FLIGHT 2000
    Stern
Reproduction Playfield

Artwork by Lance Foster, CPR Art Team

Classic Stern fans can rejoice with a whole new life for their widebody masterpiece.  Genuine 8-color enamel silkscreened and 5-layer polyeurethane clearcoated.  Dimpled both sides, drilled, and ready for installation right out of the box.  For a close look, be sure to check out the Flight 2000 Gallery to see outdoor photos, as well as commentary on this reproduction.  Plastics set Combo is also being offered, where you get the complete $165 set with clears (saving $55) and no additional shipping to slip them into your playfield box.


Price:  $575.00 USD  Playfield alone
Price:  $685.00 USD
  Playfield + Plastics Combo


Shipping (widebody rates):

$59.00 to USA
$49.00 to Canada
$149.00 Europe (5-6 days)
$219.00 all other, Global (5-6 days)


DETAILED PHOTO GALLERY - Click Here
 


2-Tone Blue Example (3X zoom)


Spot Blue Example (3X zoom)

Part #: WHO-2TONE -or-  WHO-SPOT
In Stock: YES

Bally Midway
DOCTOR WHO
Reproduction TIME EXPANDER

Artwork by Mike Mills, CPR Art Team

This is Doctor Who's mini-playfield found in the Time Expander mechanism at the top of the playfield.  Usually beat to death and tore up badly, this is a turnkey replacement - and best of all - NO MYLAR EVER AGAIN !  Built like a fullsize CPR playfield, 6-color silkscreened and polyeurethane clearcoated on genuine American Hardwoods 17/32 mapletop gameboard stock.  The two versions offered are identical structurally, but differ in the main blue color - one is two-tone blue using halftone dots for darkening, the other is a single spot blue that accomplishes the same blue tone but saved a print shift (thus the cost savings).  Drilled, T-nutted, ready for immediate swap.



Price:  $99.00 USD 2-tone blue version
Price:  SOLD OUT 
spot blue version

Shipping :
 
$15.00 to USA or Canada
$59.00 Europe (5-6 days)
$69.00 all other, Global (5-6 days)



DETAILED PHOTO GALLERY - Click Here

Part #: MINI-BRIDE
In Stock:  YES

Williams
THE MACHINE
BRIDE OF PIN*BOT Reproduction Mini-Playfield

Artwork by Kevin, CPR

Genuine 6-color silkscreened on original 1/8" Acrylic replacement mini-playfield.  Years of ball wear have scuffed and fogged the original mini's, making the viewability through your upper playfield dull and dirty.  The battle with Novus2 can stop now. Crystal, and we mean crystal, clear transparency of this new mini playfield will restore the clarity on your BOP and revive the look of that whole area in your machine.

Price:  $40.00 USD

Ships free with any plastic set, playfield, or backglass

But if you must ship it alone:

$14.00 to USA or Canada
$59.00 Europe (5-6 days)
$69.00 all other, Global (5-6 days)


DETAILED PHOTO GALLERY - Click Here

Part #: MINI-PBOT
In Stock:  YES

Williams PIN*BOT
Reproduction Mini-Playfield

Artwork by Kevin, CPR   

Genuine 4-color silkscreened beefy 3/8 Acrylic replacement mini-playfield.  Years of ball wear have scuffed and fogged the original mini's, making the viewability through your upper playfield dull and dirty.  The battle with Novus2 can stop now.
Crystal, and we mean crystal, clear transparency of this new mini playfield will restore the clarity on your Pin*Bot and revive the look of that whole area in your machine.  Includes a bonus beefy 3/8" thick matching key fob.  Unpeeled.


Price:  $55.00 USD standard version
Price: 
"Bling Edition"  SOLD OUT

Bling Edition features custom mirroring (see photo gallery)


Ships free with any plastic set, playfield, or backglass

But if you must ship it alone:

$14.00 to USA or Canada
$59.00 Europe (5-6 days)
$69.00 all other, Global (5-6 days)



ORDERING INSTRUCTIONS

To Make your Order, simply PAYPAL to CPR, DIRECT

Simply add your price + your choice of shipping = TOTAL payment
PayPal payment to:  store@classicplayfields.com


Be sure to include your exact shipping address and you
MUST please name the
Part Number(s) you are buying in the "notes" section of the PayPal payment. 
This will prevent any confusion with what should be packaged for your order.  THANKS.